Before applying Belinka universal acrylic primer, you must prepare the surface accordingly. Fresh concrete or freshly applied plaster should dry well for at least 28 days before painting. When painting surfaces with an already applied coating, the surface must be cleaned with a brush and / or washed with water with the addition of a cleaning agent. Old cracked or flaking coatings must be removed. Serious damage and cracks should be repaired with appropriate mineral putty. Old wallpaper and glue residue before applying the primer must be completely removed. Surfaces infected with mold or fungus should be treated with Belinka mold remover before applying the primer and after drying, remove dead fungi and mold mechanically. The primer is not applied to smooth, glossy and intact surfaces. Before applying the universal acrylic primer, if necessary, can be diluted in a 1: 3 ratio with water. The primer is applied by brush or roller on a dry surface. During application and drying, the temperature of the paint, substrate and air should not be below + 5 ° C, the relative humidity of the air should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), the next coat can be applied after 12 hours. At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water. Before applying the universal acrylic primer, if necessary, can be diluted in a 1: 3 ratio with water. The primer is applied by brush or roller on a dry surface. During application and drying, the temperature of the paint, substrate and air should not be below + 5 ° C, the relative humidity of the air should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), the next coat can be applied after 12 hours. At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water. Before applying the universal acrylic primer, if necessary, can be diluted in a 1: 3 ratio with water. The primer is applied by brush or roller on a dry surface. During application and drying, the temperature of the paint, substrate and air should not be below + 5 ° C, the relative humidity of the air should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), the next coat can be applied after 12 hours. At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water. relative humidity should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), the next coat can be applied after 12 hours. At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water. relative humidity should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), the next coat can be applied after 12 hours. At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water.
Specifications
Ingredients : styrene-acrylate copolymer, functional additives and water. Consumption : 1 liter of universal acrylic primer per 10-12 m 2 smooth surface. When dyeing highly absorbent and rough surfaces, consumption increases. Storage : in its original packaging at a temperature of +5 – + 30 ° C. Do not freeze!