Enamel BT-177

Purpose (BT-177)

Enamel is used to paint and protect metal structures and products used in harsh atmospheric conditions. The surface covered with BT 177 paint in 2 layers retains its protective properties for 2-5 years.

Application

The old coating is cleaned of dirt, rust, scale, loose old coating and degreased. Enamel must be thoroughly mixed until uniform throughout the volume of the container. When painting, it is desirable that direct sunlight does not fall on the coating. To put with a brush, the roller or an airbrush in 2 layers. The warranty period of storage of paint in tightly closed container makes 12 months from the date of production. Do not carry out work near an open source of fire.

Restrictions

The internal surfaces of containers for collecting and storing water to paint this paint is prohibited. The same applies to metal products that heat up above + 150 ° С.

Specifications (BT-177)

Item number	The name of indicators	Norm
one	Film color	yellow, the shade is not normalized
2	The appearance of the film	after drying the film should be smooth, uniform, without extraneous inclusions
3	Mass fraction of nonvolatile substances of the semifinished product of the primer,%	60 + 3
four	Relative viscosity by viscometer at T (20 + 0.5) 0 С, s	20-28
five	Drying time to degree 3 at T (20 + 2) 0С, h, not more than	6
6	The degree of grinding of semi-finished primer, µm, not more	50
7	Flexural elasticity of the film, mm, not more	five
eight	Film durability at impact on the device, cm, not more	50
9	Film resistance at T (60+) С, h, at least, to action:
	Fuel	6
	Water	6
ten	Adhesion, points, not more	one