Parketin Waterborne Varnish
October 26, 2018
Email Radiator
October 26, 2018
Belinka 2K Water Parquet Varnish
Belinka 2 K water-based parquet lacquer is a colorless two-component polyurethane coating.
-
- colorless polyurethane varnish for wooden floors
-
- highly resistant to abrasion
-
- dries quickly, has excellent protective properties
-
- glossy, semi-matte or matte
Tropical wood may contain various waxes, resins and other substances that may weaken the adhesion of varnish to the base. Therefore, before varnishing, it is necessary to test the surface. Do not pour into drains.
Application
It is necessary to ensure that it is free of charge. Wood moisture should be below 12%. We recommend applying a water-based parquet for one or two layers. Mix each component thoroughly before use. To component A add component B in a volume ratio of 10A: 1B. Stir the mixture thoroughly, without adding water. Soak for 15 minutes and strain the cooked mixture. During the drying process 40–70% should be between 15 ° C and 25 ° C. Drying time depends on temperature and relative air humidity.As a working tool, it is recommended to use it for an average pile of water. We recommend an intermediate sanding of granulated paper 240 – 320 with sanding paper. Before applying each subsequent layer.
Specifications
Number of applications : 1-2 coats of water-based parks for water-based parks and 3 coats of water. Mixture use time : 4 hours (under normal conditions). Drying : For Dryness, For One Hour. It is recommended after 4-8 hours, depending on the conditions. As a rule, it is possible to use it no longer than 24 -48 hours after the last application. Completely surface ready for use after 8 days. Consumption : 1 liter of varnish mixture for approximately 3 m 2 (three layers). Cleaning items and tools : Items should be cleaned immediately with water after use. Storage : 12 months . Packaging : kit: 5 l of component A + 0.5 l of component B
