Wood restoration

Nowadays, the construction of new wooden houses, as well as the restoration of old, well-worn buildings, is becoming more and more popular. Over time, the wood begins to lose its original beauty: the warm, golden color of the material burns out after a few years, and the tree begins to darken. How to restore beauty and freshness to the tree?

A constant effect of precipitation on the tree, as well as temperature differences and some other factors ultimately lead to the appearance of fungus and mold. What to do in this situation? How to restore old wood and return it to its original appearance?

Wood recovery methods:

This is a mechanical method that allows you to remove biological damage, as well as remove the top layer of wood. Among the advantages of this method are the possibility of completely eliminating the darkening, as well as existing biological damage.

Among the disadvantages of polishing can be noted that this is a very time-consuming method that requires special skills, as well as tools. In addition, such processing of the tree will take a long time. And still similar processing leads to thinning of a tree, and does not give it antiseptic protection. As a result, the wood will begin to look fresh, but it should not be forgotten that it must be further processed with antiseptic and bioprotective compounds, otherwise the result will be very short-lived.

For coloring usually used enamels and paints. Among the advantages of this method, it should be noted that this is the traditional and easiest way to quickly update the appearance of the tree. This is a low-cost method, especially since it can be implemented independently.

Among the disadvantages of this method, it should be noted that in this case the already existing biodefections are not removed. And another thing: before using the composition, you must first treat the wood from fungus and mold.

In addition, both enamels and paints are able to completely hide the texture and texture of wood. They are devoid of any protective properties, and therefore are not able to prevent further damage to wood. Such coverage is very short-lived, and require updating in a couple of years.

The painted tree looks refreshed for a while, but not quite wooden. And if you buy cheap enamels and paints that are not breathing, their use will eventually lead to the destruction of the wood from the inside.

Most often it is carried out using chlorine bleaching compositions. Among the advantages of whitening are instant color restoration and removal of existing biological damage.

This is an economical way that does not require any special skills and knowledge. Among the disadvantages, it is possible to note first of all that this method requires a lot of effort and time: after the implementation of the work, the wood should be thoroughly washed with water in order to wash off the chlorine residues.

In the future, further surface treatment should be carried out with bioprotective compounds, since bleachers do not provide antiseptic protection to the tree. This method is not recommended for friable, heavily destroyed wood.

Tinting and varnishing
One of the most effective and durable ways to protect a tree today is of course high-quality impregnation with tinting or colorless acrylic or polyurethane solutions with further opening with high-quality weather-resistant glossy or matte varnishes. As a result, we get any desired shade of wood (oak, pine, mahogany, teak, rowan-kalina-raspberry, etc.) with a pronounced structure, which is reliably protected by polyurethane-alkyd or polyurethane-acrylic varnish for many years.

How to return beauty and freshness to the tree – for work you can use a special restorative compound, for example, an antiseptic primer. He will paint wood black completely, leaving the texture of the wood visible.

Thanks to the tinting, the wood can be given any desired color. Antiseptic will strengthen the upper layers of the tree, and will not allow it to further deteriorate. Antiseptic is a durable coating, and has a service life of up to seven years when processing exterior surfaces.

Among the shortcomings, we can note that the antiseptic soil is not able to eliminate the existing biological lesions, and therefore, before applying the composition, the tree should first be cleaned of fungi and mold.

After applying 2 layers of the compound, you will receive updated wood that will last you a very long time. In addition, you will receive at the same time the desired color.

How to restore beauty and freshness to a tree – there is no one opinion as to how it is better to renew darkened wood. Radical methods can be applied only in the most extreme cases, and most often you can solve the problem with minimal effort.

Choosing the best way, it should be remembered that first of all it is all about your own home and creating comfort in it. It is unlikely in this case appropriate savings. You should think carefully and give your preference to the means that will allow you to restore the look of wood as quickly as possible.