Facade paint is designed for exterior and interior painting of buildings and structures on concrete, brick, plastered and other porous surfaces.
Creates a weatherproof matte finish. Differs in an economical expense
New plaster left untreated for 28 days. Remove dust, dirt and grease stains from the painted surface. Defects of a surface to eliminate with the help of putty. To grind a surface, to remove dust. To level the absorbency, improve adhesion and strengthen the painted surface, it must be treated with a “Polycolor” or “Comfort” deep penetration primer.
Remove dust, dirt, grease stains and all fragile parts of old paintwork coatings from the painted surface. Moss, mold, “efflorescence” or algae are removed without residue by mechanical means. Treat affected areas with a bioprotective agent. Defects of a surface to eliminate with the help of putty. To grind a surface, to remove dust. To level the absorbency, improve adhesion and strengthen the painted surface, it must be treated with a “Polycolor” or “Comfort” deep penetration primer.
Stir the paint thoroughly before use and dilute if necessary with water (not more than 10%). Paint applied in 1-2 layers. The second layer is applied after the first layer has dried for 1 hour. During the work, the temperature should not be below +5 0С. After completing the work, rinse the tools with water.
brush, roller, airless spray.
At a temperature of + 20 and a relative humidity of 65%, the drying time for one coat of paint is 1 hour.
120-170 g / m2 with a single layer coating.
Store in tightly closed original packaging, protected from heat and direct sunlight at a temperature not lower than + 5 and not higher than + 35. Protect from freezing!
White, can be tinted with water pigment pastes
Warranty period of storage 18 months
1.4 kg, 4.2 kg, 7 kg, 14 kg