DUFA Mattlatex D100

Properties

• • white

 

• • matt

 

• • for interior work

 

• • resistant to washing

 

• • high covering ability

 

Colour

 

White

 

Gloss degree

 

Matte finish

 

Abrasion class

 

2 according to DIN EN 13300

 

Density

 

1.56 kg / l

 

Binder

 

Acrylic dispersion

 

Composition

 

Titanium dioxide, functional additives, mineral fillers, water. The maximum permissible concentration of volatile organic compounds (VOC) for materials of category A / a, according to EU directive, is 30 g / l (2010) this product contains <30 g / l VOC.

 

Solvent (thinner)

 

Water (up to 10%)

 

Base

 

Preparation of the foundation is carried out according to DBN V.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. The surface must be clean, dry and workable. Dust, remains of lime whitewash, glue and oil-based coatings, and other contaminants should be thoroughly removed. Strong alkyd and oil coatings sanding and dusting. Irregularities align with düfa Acryl-Spachtel putty. Fresh cement plaster must be cured for at least 28 days. Humidity of the bases should not exceed 4%, gypsum bases – 1%. Absorbing and chalky surfaces, plastered areas should be treated with a primer of the trademark düfa. Clean the areas affected by fungi with düfa Schimmelentferner and treat with düfa Grund Antiseptik D613 antiseptic solution according to the instructions.

 

Drawing

 

Stir well before use. Apply with a brush, roller or spray (including airless method). Primary coating: paint diluted to 10% with water. Final coating: do not dilute the paint. Painting surfaces in the same plane should be done using the “wet on wet” method, without interruptions in work. When applied by airless spraying, use a nozzle of 0.66-0.79 mm and a pressure of 160-180 bar. When applied by air spraying, dilute with water to a working viscosity and use a 2 mm nozzle. When using TM Wagner devices, we recommend using the Wagner Flexio W585 model in small areas. The working power level (AIR CONTROL) 7-8, nozzle diameter 2.5 mm. To dilute paint with water for 3%. With significant areas of application it is more rational to use the apparatus Wagner ProjectPro 117, recommended nozzle 517 at a working pressure of 200 bar. Paint in this case can not be diluted.

 

Consumption

 

Consumption per layer –80-100 ml / m², depending on the granularity of the substrate. The exact consumption is determined by the test staining on the object.

 

Note

 

To paint surfaces that can be damaged by microorganisms with the addition of düfa Schimmelstopp anti-mold additive to paint.

 

Tool cleaning

 

Wash the tools after work.

 

Drying time

 

Drying time before applying the next layer –1-2 hours at a base temperature of + 20 ° С and relative air humidity of 60%. In other conditions, the drying time may change. Full strength and the ability to perceive the mechanical load of the coating acquires after 7 days.

 

Application temperature

 

Do not paint at the temperature of the base and air below + 5 ° C and relative air humidity more than 80%.

 

Tinting

 

Dye düfa Vollton-und Abtönfarbe D230, also by machine according to the system Color Mix or SELECT.

 

Packing

 

1 l, 2.5 l; 5l; 10l, 25l, 14kg, 3.5 kg

 

Storage

 

In a tightly closed container in a cool place at a temperature of + 5 ° C to + 30 ° C; avoid direct sunlight on the container. Guaranteed shelf life in hermetically sealed original packaging is 36 months. See the date of manufacture and batch number on the package.

 

Security measures

 

Keep out of the reach of children. In case of contact with eyes, rinse immediately with clean water. Do not inhale vapors when spraying.

 

Recycling

 

Do not pour paint into sewers, waterways or onto the ground. Remains of dried paint are disposed of as normal construction waste.