Antiseptic

Universal Antiseptic Concentrated. Designed for plasters, concrete, fiber-concrete slabs, plasterboard and walls painted with dispersion paints.

Properties:

• High penetrating power;
• Provides long-term protection;
• Does not change the decorative properties of coating materials after application;
• Ecological safety of the material (water is used as a solvent).

Technical details:

Composition	Aqueous solution of biocidal substances
Relative viscosity	Not less than 32 seconds by VZ-2
Solvent	Water
Packaging	1 l, 5 l
Warranty period of storage	12 months from date of manufacture

Guide to the use of antiseptics:

Application Methods	Working viscosity
Brush, Brush, Spray	Dilute with water in the ratio: 1 part of antiseptic to 4 parts of water. If the damage is significant, you can use an undiluted or less diluted antiseptic solution.
Working conditions	Air temperature at drawing not below 5 ° С and relative air humidity no more than 70%
Antiseptic consumption	On a single-layer coating – (0.05-0.1) l / m2.
Cleaning tools	Water

Surface preparation:

It is not recommended to clean the mildew surface with a mechanical method (with brushes or scrapers), since microorganisms can spread to the unaffected surface. Apply a diluted antiseptic to the affected surface. After the surface has dried, the mold and the particles are stratified, mechanically removed with a spatula, wire brush, or, best of all, water under pressure. If the damage is significant, you can use an undiluted or less diluted antiseptic solution.

Preparation of antiseptic:

Mix thoroughly and dilute 1 part of antiseptic to 4 parts of water.