Varnish for parquet (Aqua-Parketlak Mat)

UNIQUE PROPERTIES

• water soluble
• for interior work
• abrasion resistant
• dries quickly
• cleans well
• with a neutral smell

Colour

Transparent

Gloss degree

Semi-matt

Density

1.01 ± 0.01 kg / l

Composition

Dispersion of pure acrylate, matting agent, water, additives. The maximum permissible concentration of volatile organic compounds for materials of category A / d, according to EU directive, is 140 g / l (2010); This product contains no more than 120 g / l VOC.

Solvent

Water

Base

Must be clean, dry, durable, degreased, free of contaminants and substances that act as a separator (such as resin, wax, grease, old, weak coatings, etc.). Base, depending on the type, pre-process, as indicated below.
Wood: wooden and parquet floors should be sanded and dust-free. Remove wax, polish and care products. Significant irregularities align with specialized putty for wooden floors. Sand after drying. Tropical or resinous wood should be thoroughly washed or cleaned with a special resin remover or high-quality solvent, and let it dry well. The moisture content of wood in constructions with given geometrical dimensions must not exceed 13 ± 2%, in constructions without given dimensions – 18%.
Old coatings: loose, flaking and cracked old paint layers can be removed without residue. Solid old paint coats should be lightly sanded, checked for overlapping and compatible with the new coating. If necessary, test with adhesive tape for adhesion.

Drawing

Stir well before application. Absorbent bases should be primed with varnish diluted with water by 5-15%. Apply lacquer undiluted in 2-3 layers, depending on the further load on the floor (maximum number of layers – 5). Apply by brush, roller or spray; It is recommended to use special acrylic brushes (a mixture of synthetics and natural bristles). On large surfaces, use a short-haired nylon roller (4-6 mm) and immediately go through a small-pore roller or acrylic brush. Mohair and velor rollers are not suitable for application. After application, protect the floor surface from dust and moisture.
When applying by airless spray, use a nozzle of 0.01010.013 inch and a pressure of 160 bar, while not diluting the varnish. When applied by air spraying machines, dilute the varnish with water to a working viscosity, use a nozzle of 1.5 mm and a pressure of 3 bar.

Consumption

About 100 ml / m² when applied to smooth, slightly absorbent substrates. On rough surfaces, consumption increases. The exact flow rate is determined by test painting on the object.

Special features

Varnish is not intended for use in saunas and baths!
Clean the dried surface with a soft brush or cloth; contaminated sites with a cloth moistened with a neutral detergent solution (pH 6-8). When installing furniture use specials. foot linings.

Cleaning tools

Rinse work tools with water immediately after completion of work.

Drying time

At a temperature of + 20 ° С and relative air humidity max. 60% repainting after 2 hours. At lower temperatures and higher humidity, the coating dries longer. After 12 hours, you can walk on the painted surface. Commissioning – in 7 days.

Application temperature

Work should be carried out at a surface and air temperature not lower than + 8 ° С and relative air humidity not more than 80%.

Tinting

Varnish is recommended not to tint

Packing

0.75 L; 2.5 l

Storage

In a tightly closed container in a cool place at a temperature of + 5 ° C to + 35 ° C. Avoid direct sunlight on the container. Warranty period of storage in hermetically sealed original packaging is 18 months.

Security measures

Keep out of the reach of children. Avoid contact with skin. When performing work use protective equipment: gloves, glasses. Do not inhale vapors when sprayed. In case of contact with eyes, rinse immediately with clean water. Do not pour into drains, watercourses or on the ground.

Recycling

Only completely empty packaging to be recycled. Dispose of dried material in accordance with local regulations.