Solvent Nefras C2 80/120
October 2, 2018
Drying oil Natural Linen
October 2, 2018
Drying oil “OKSOL”
Composition
It is a solution of oxidized vegetable oil in organic solvents, modified by desiccant. It penetrates the pores of wood perfectly, emphasizes the structure of the product, has high wear resistance, good drying.
Purpose (Drying oil “OKSOL”) It is
intended for dilution of thickened paints, for impregnation of wooden surfaces, plaster before painting them with oil paints. Intends for external and internal works.
Application
Drying oil is ready for use. Before use, the drying oil is recommended to mix. To apply at a temperature not below + 10C. If necessary, add 10-12% solvent (white spirit). Sand and clean the surface from dust. If you want to change the color of the coating process the stain. Drying oil is applied on a dry surface. To put with a brush or the roller with a break at 24-36 hours (depending on temperature and humidity of air). If necessary, you can putty small gaps by mixing the varnish with sawdust to obtain a dense homogeneous mass. In all cases, the linseed oil should be applied in a thin layer.
Technical characteristics (Drying oil “OKSOL”)
| No | Name of the indicator | Value |
| one | Color on iodometric scale, mg @ cm? | not darker than 800 mg / 100cm? |
| 2 | Conditional viscosity at (20 + -0.5) 0С according to ВЗ-246, 4mm nozzle | 19-25s |
| 3 | Acid number | no more than 8 mg KOH / g |
| four | Mass fraction of nonvolatile substances | 54.5-55.5% |
| five | Sucks by volume | no more than 1% |
| 6 | Transparency | Complete |
| 7 | Drying time to degree 3, h, at (20 ± 2) С | no more than 24 hours |
