Spent oiled wipes should not be stored in a container with water or burned to prevent their spontaneous combustion.
Application
Before using it, it is free from dust, oils, waxes and other contaminants. The wood must be dry. Before it is heated to 30-40 ° C for better absorption into the substrate. At 30% Belsol. Oil in excess is applied to a brush or roller. After 15 minutes, it has been cleaned with an absorbent cloth or paper towel. It is recommended that you use it to protect your body.During work, use personal protective equipment and provide ventilation. It is therefore not necessary to make a film of film . It is not recommended to use the oil at a temperature below +15 ° C. Immediately after completion of the workout.
Specifications
Ingredients: tung oil. Consumption: 60 – 100 ml / m 2 , depending on the type of wood, porosity and preliminary surface treatment. Drying time: 24 hours under normal conditions (T = 20 ° C, rel. Air humidity = 65%). Drying time is extended with decreasing temperature or humidity. Cleaning tool: water solution with detergent or Belsol. Storage conditions: Temperature: from 5 to 30 ° C. Package: 0.5 l
Recommendations
Surface preparation
Oil application
Care for oil-treated surfaces
Packaging and storage conditions for oils