When applying water tannin (oak, chestnut, hilly coniferous wood), it can eventually become a yellowish tint.
Application
When painting wooden structures that will be used in wet areas, it is recommended to pre-treat the surface with an impregnating compound Belinka Impregnant. For work, you should use a tool for applying waterborne coatings. During the application and drying period, the air temperature should not be lower than 10 ° C, and the relative air humidity should not exceed 80%. When applying the first layer add up to 10% water. The coating is applied along wood fibers. The appearance of the surface will be better if the first layer of the azure coating is lightly sanded and dust residues are removed. During application, the coating will first have a milky hue, after drying it will disappear and the coating will become transparent. When applying water azure coatings on wood containing tannin (oak, chestnut, hilly coniferous wood), the surface may eventually become yellowish. The Interier product is also suitable for coloring beehives (in this case, it is recommended to apply 3 layers of azure) and children’s toys. Do not freeze the product.
Specifications
Ingredients : acrylic resins, water-repellent substances, light-resistant pigments, additives and water. Application : 2 coats (in wet rooms, an Impregnant primer is first applied) Cost : one liter of azure in two coats is enough to cover 8-10 m 2 of wood surface, depending on the type and treatment of wood and the method of application Drying : 3-4 hours, the next layer after 4 hours (under normal conditions) Storage : in its original packaging at a temperature of 5-30 ° C. Expiration date stamped on the packaging. Do not freeze! Packaging : 0.2 l, 0.75 l, 2.5 l, 10 l