Spent oiled wipes should not be stored in a container with water or burned to prevent their spontaneous combustion.
Application
Before using it, it is free from dust, oils, waxes and other contaminants. The wood must be dry. Stir the oil before use. Oil in excess is applied to a brush or roller. After 15-20 minutes, it must be cleaned with an absorbent cloth or paper towel. It is recommended that you use it to protect your body. Protection quality when the surface is no longer absorbs oil. During work use personal protective equipment.It is not recommended to use the oil at a temperature below +15 ° C and rel. air humidity above 75%.
Specifications
Ingredients: vegetable oils, non-aromatic solvent and additives. Contains 2 – butanone oxime. May cause an allergic reaction. Consumption: 50-100 ml / m 2 depending on the type of wood, porosity and pre-treatment of the surface. Drying time: 24 hours under normal conditions (T = 20 ° C, rel. Air humidity = 65%). Drying time is extended with decreasing temperature or increasing humidity. Cleaning tool: water solution with detergent or white spirit. Storage conditions: in the original factory sealed container, at a temperature of from 5 to 30 ° C. Flash point: above 65 ° C. Packaging: 0.5 l, 2.5 l
Recommendations
Surface preparation
Oil application
Care for oil-treated surfaces
Packaging and storage conditions for oils