Designed for painting walls and ceilings indoors, on concrete, brick, plastered, plasterboard, surfaces, as well as for painting wallpaper.
Water-borne. Differs in convenience when drawing and an economic expense. Creates a matte coating resistant to wet abrasion (class 3 according to DSTU EN 13300)
New plaster left untreated for 28 days. Remove dust, dirt and grease stains from the painted surface. Defects of the surface. To grind a surface, to remove dust. Surface Polyester or or Comfort Comfort deep deep penetration primer.
Remove dust, dirt, grease stains and paint. Defects of the surface. To grind a surface, to remove dust. Surface Polyester or or Comfort Comfort deep deep penetration primer.
Stir the paint thoroughly before using it (not more than 10%). Paint applied in 1-2 layers. First, paint the walls with corners. Then starting with a roller, starting from the window. The second layer is dried for 1 hour. During the work, the temperature should not be below + 5 ° C. After completing the work, rinse the tools with water.
brush, roller, airless spray.
At a temperature of 50%, it is 1 hour.
140-170 g / m2 with a single-layer coating, depending on the type of surface.
Store in a small amount of heat and heat up to 35 ° C. Protect from freezing!
White can be tinted with water pigment pastes
Warranty period of storage 18 months