Scope of application: intended for the rehabilitation of internal and external wall surfaces damaged by mold and fungus, as well as for the destruction of fungus on wooden surfaces.
Universal Antiseptic Concentrated. Designed for plasters, concrete, fiber-concrete slabs, plasterboard and walls painted with dispersion paints.
Composition | Aqueous solution of biocidal substances |
Relative viscosity | Not less than 32 seconds by VZ-2 |
Solvent | Water |
Packaging | 1 l, 5 l |
Warranty period of storage | 12 months from date of manufacture |
Application Methods | Working viscosity |
Brush, Brush, Spray | Dilute with water in the ratio: 1 part of antiseptic to 4 parts of water. If the damage is significant, you can use an undiluted or less diluted antiseptic solution. |
Working conditions | Air temperature at drawing not below 5 ° С and relative air humidity no more than 70% |
Antiseptic consumption | On a single-layer coating – (0.05-0.1) l / m2. |
Cleaning tools | Water |
It is not recommended to clean the mildew surface with a mechanical method (with brushes or scrapers), since microorganisms can spread to the unaffected surface. Apply a diluted antiseptic to the affected surface. After the surface has dried, the mold and the particles are stratified, mechanically removed with a spatula, wire brush, or, best of all, water under pressure. If the damage is significant, you can use an undiluted or less diluted antiseptic solution.
Mix thoroughly and dilute 1 part of antiseptic to 4 parts of water.