Primer EP-0215 yellow
(TU 6-10-1966-84)
APPOINTMENT:
For protection against corrosion of an internal surface of the fuel tanks working in the environment of fuel with impurity of water.
SPECIFICATIONS:
Film color | Yellow, the shade is not normalized |
The appearance of the film primer | After drying, the primer film should be smooth, uniform, without foreign inclusions. Cratering is allowed. |
Conditional viscosity of a semi-finished primer using a VZ-4 viscometer at a temperature of (20.0 ± 0.5) ° C, with at least | 17-25 |
Mass fraction of nonvolatile substances of the semifinished product of the primer,% | 60 ± 3 |
Grinding degree, µm, not more than for a semi-finished primer: | 50 |
Drying time to degree 3, h, not more, at a temperature of (20 ± 3) ° C: | 6 |
Flexural elasticity of the film, mm, not more | five |
Adhesion of film, points, not more | one |
The strength of the film when struck by the device U-1. see no more | 50 |
The resistance of the film at a temperature of (60 + 2) ° C, h, at least, to static effects: | |
Water | 6 |
fuel | 6 |
APPLICATION:
Primer is applied to the surface by pneumatic spraying. It is applied with ASOT-2 or AGM-9 hardeners. For dilution to working viscosity use solvent R-5A.
Viability after mixing with the hardener is 24 hours.
STORAGE:
Warranty storage period – 6 months from the date of manufacture.