Enamel AC-131
October 2, 2018Enamel AC-599
October 2, 2018
Enamel AC-182
Composition
Due to its composition, AC 182 enamel has an increased resistance to weathering in temperate and tropical climates. It has a high adhesion to the surface, falls flat and without stains. After drying, it has a uniform and high-gloss film that retains its protective and decorative properties for five years.
Purpose (AC-182)
It is used for painting machinery and parts in mechanical engineering. For coloring agricultural machinery and other metal products that are used in different climatic conditions. Staining can be done by pneumatic or electrostatic spraying. It is applied with VL-02, FL-OZk, GF-021, GF-032, PF-020, EP-0010, EP-09T
Application (AC-182)
The surface must be dry and free from dust, dirt, corrosion and old paint residues. Before applying the enamel, mix until uniform throughout the entire volume of the container. If necessary, you can stir with solvent, nefras A 120/200 or their mixture. Apply by pneumatic, airless or electrostatic spraying. Work in personal protective equipment using a respirator and rubber gloves. To the workplace to ensure a constant flow of fresh air. Prevent material from entering the respiratory and digestive organs. It is forbidden to work near an open source of fire.
Specifications (AC-182)
| No | Name of the indicator | Value |
| one | Film color | It must be within the limits of permissible deviations established by the control color samples or by the standards of the “Card File”. |
| 2 | The appearance of the film | After drying, the enamel film should be smooth, uniform, glossy, without wrinkles, smudges and inclusions. |
| 3 | Film gloss by photoelectric gloss meter, not less, (%) | red – 55 other colors – 57 |
| four | Conditional viscosity according to the viscometer of the type VZ-246 with a nozzle diameter of 4 mm, at a temperature of (20.0 ± 0.5) ° C not less, (s) | 80-120 |
| five | Mass fraction of nonvolatile substances, (%) | light smoky – 53-58; red-orange – 50-55; dark yellow – 52-58; ivory – 54-60; yellow – 58-64; other colors – 48-54. |
| 6 | Grinding degree not more than (µm) | 20 |
| 7 | Hiding power of dried film no more, (g / m?) | red-orange, yellow, dark yellow – 60; red – 70; ivory – 75; other colors – 50. |
| eight | Drying time to degree 3 at a temperature of (20 ± 2) ° С, (h) | 1.5 |
| 9 | Bending elasticity of film 10, (mm) | one |
| ten | The strength of the film upon impact, (cm) | 50 |
| eleven | Film hardness, not less, using a pendulum device of the type: (standard units) | 0.5 |
| 12 | Adhesion of film no more, (points) | one |
| 13 | Resistance of the coating at a temperature of (20 ± 2) ° C to static effects | water – 48 industrial oils – 48 nefras or diesel fuel – 12 |
