Wall and ceiling paint resistant to washing
September 3, 2018MIKS facade paint
September 3, 2018
Paint for walls and ceilings MIKS
Scope of application: for protective and decorative finishing of surfaces of walls and ceilings.
It is used for painting all types of mineral plasters, fiber-cement boards, concrete, gypsum boards, fiberglass wallpapers, paper embossed wallpapers and old coatings.
Properties:
- Quick-drying material;
- For application to various surfaces;
- High vapor permeability of the coating;
- High coverage;
- Environmental safety of the material (water is used as a solvent);
- Long service life of the finished coating.
| Technical details | |
| Composition | Acrylic copolymer dispersion, pigments, fillers, water |
| Dry residue | (63-66)% |
| Relative viscosity | (14-18) Pa · s using a Brookfield viscometer |
| Density | (1.62-1.67) kg / l |
| Colour | White, the possibility of tinting pigment pastes |
| Solvent | Water |
| Packaging | 1 l, 5 l, 10 l |
| Warranty period of storage | 12 months from date of manufacture |
| Paint application manual | ||
| Application Methods | Working viscosity | |
| roller brush | diluted by 5-10% with water | |
| paint sprayer | ||
| Working conditions | The air temperature when painting is not lower than 5 ° C and the relative air humidity is not more than 70%. | |
| Drying time | At a temperature (20 plus or minus 2) wasps and a relative air humidity of no more than 65% – no more than 2 hours. Low temperature and high humidity prolong the drying time. |
|
| Paint consumption | On a single-layer coating – (0.075-0.1) l / m2. | |
| Cleaning tools | Water |
Surface preparation:
From the surface to be painted, remove dust, other dirt, old paint, peeling. Fill large cracks and damaged areas with appropriate mineral-based material. If necessary, treat the painted surface with an antiseptic universal MIX color and a primer of deep penetration MIX color.
Paint preparation:
Mix thoroughly and dilute to working viscosity.
