Paint for walls and ceilings MIKS
September 3, 2018Paint water – dispersive VD – AK – 111
September 3, 2018
MIKS facade paint
Scope of application:
For protective and decorative finishing of facades, and also all other external and internal mineral wall surfaces.
Used for painting all types of mineral and dispersive plasters, fiber-cement and dispersion plates, concrete, gypsum boards, fiberglass wallpaper, paper embossed wallpaper, as well as for repainting old dispersion paints.
Properties:
- High atmosphere and moisture resistance;
- Quick-drying material;
- For application to any surface;
- High coverage;
- Environmental safety of the material (water is used as a solvent);
- Long service life of the finished coating.
Technical details:
| Composition | Acrylic dispersion, pigments, fillers, water |
| Dry residue | (61-64)% |
| Relative viscosity | (10-15) Pa · s by Brookfield viscometer |
| Density | (1.53-1.58) kg / l |
| Colour | White, the possibility of tinting pigment pastes |
| Solvent | Water |
| Packaging | 1 l, 5 l, 10 l |
| Warranty period of storage | 12 months from date of manufacture |
Paint application guide:
| Application Methods | Working viscosity | |
| roller brush | diluted by 5-10% with water | |
| paint sprayer |
| Working conditions | The air temperature when painting is not lower than 5 ° C and the relative air humidity is not more than 70%. Paint should not be applied in rainy, foggy and windy weather. In sunny weather, the facade must be protected from direct sunlight. |
| Drying time | At a temperature (20 plus or minus 2) wasps and a relative air humidity of no more than 65% – no more than 2 hours. Low temperature and high humidity prolong the drying time. |
| Paint consumption | On a single-layer coating – (0.125-0.175) l / m2. |
| Cleaning tools | Water |
Surface preparation:
Remove dust and dirt from the surface to be painted. Old paint, peeling, remove to a solid base. If necessary, treat the painted surface with an antiseptic universal MIX color and a primer of deep penetration MIX color. Before painting the surface must be dry and durable.
Paint preparation:
Mix thoroughly and dilute to working viscosity.
