Ready-to-use acrylic filler for leveling defects of wooden, concrete, plastered surfaces and drywall, used in atmospheric conditions and indoors with normal humidity. Very easy to apply and sand. Allows you to get a smooth surface.
PROPERTIES:
Aligns significant bumps and fills holes. Plastic, well applied and polished. It has a slight shrinkage during drying. Economical. Ready to use
Stir the filler before using and dilute with water if necessary. Putty spatula up to 1 mm thick. Apply subsequent layers after drying the previous layer. The zashpatlevanny surface grind, remove dust. After use, rinse work tools with water. During the work, the temperature should not be below +5 C.
Spatula
At a temperature of 4%, it is 4-5 hours.
0.9-1.4 kg / m2 per surface defects
Store at a temperature not lower than + 5 ° C and not higher than + 35 ° C. Protect from freezing!
Keep out of the reach of children. In case of contact with eyes, rinse immediately with clean water. Putty containers are disposed of household waste collection points.
White, pine, oak, walnut.
Warranty period of storage 12 months
0.25 kg, 0.5 kg, 1.5 kg