Deep penetration soil «POLYCOLOR»
October 17, 2018
Soil of deep penetration 1: 6 (concentrate) «POLYCOLOR»
October 17, 2018
Soil of deep penetration 1: 4 (concentrate) «POLYCOLOR»
PURPOSE:
The soil of deep penetration 1: 4 (concentrate) POLYCOLOR is intended for preliminary treatment of porous and highly absorbent surfaces of concrete, plaster, and brickwork.
PROPERTIES:
Strengthens and stabilizes the basis, and also increases adhesion (coupling) of the finishing materials applied on this basis. Aligns water absorption. Increases durability and reduces the consumption of topcoats.
SURFACE PREPARATION:
Remove dust, dirt, grease stains and all fragile parts of old paintwork coatings from the painted surface. Moss, mold, “efflorescence” or algae are removed without residue by mechanical means. The affected areas are treated with a bioprotective agent. Defects of a surface to eliminate with the help of putty. To grind a surface, to remove dust.
MODE OF APPLICATION:
Before use, mix the primer and dilute with water in the ratio of 1 liter of primer to 4 liters of water. To put a primer in 1-2 layers. The second layer is applied after the first layer has dried for 1 hour. During the work, the temperature should not be below +5 0С. After completing the work, rinse the tools with water.
APPLICATION METHOD:
brush, roller, spray gun.
DRYING TIME:
at a temperature of + 20 and a relative humidity of 65%, the drying time of the primer layer is 1 hour
CONSUMPTION:
0.1-0.2 l / m2 with a single layer coating.
Storage:
Store in tightly closed factory containers, protected from heat and direct sunlight at a temperature not lower than +5? and no higher than 35 ?. Keep from freezing
WARRANTY PERIOD:
Warranty period of storage 18 months
PACKING:
1 l, 2 l, 5 l, 10 l
