Toplasur

Coating should be used when the surface is required to give a glossy look. Toplasur has enhanced thixotropic properties, so it does not drain from the brush. Comes in 16 standard colors.Attention

Before subjecting garden furniture or wooden structures to mechanical loads, they should be pre-dried for a week.

Application

Toplasur gives wood mechanical stability, which is especially important when painting joinery (windows and doors) and products from solid hardwood. Toplasur can be used to protect the surface parts of marine vehicles. It is recommended for the protection of wood products used in coastal and alpine regions. The surface gives a silky gloss, does not hide the natural pattern of wood. Surfaces in damp rooms and in the open air should be primed with Base impregnating compound before painting.

Specifications

composition : suspension of UV filters and absorbent substances, light and weather resistant pigments, waxes in a solution of alkyd resins in a mixture of organic solvents  application method : brush, roller, spray, 2 layers (in wet rooms and in the open air – impregnating Base)  consumption : with a two-layer coating of 1 l / 8-10 m ²  (depending on the wood type and quality, surface finish and application method)  drying : 6 to 10 hours, subsequent layer with an interval of 12 urah tool cleaning: Belsol solvent, white spirit , turpentine , Petrol  storage : in a tightly closed container at a temperature not higher than 30 ° C, out of reach of children  ignition temperature: above 61 ° C  packaging : 1 l, 2.5 l, 5 l, 10 l

Gamma shades