Universal primer (Grund)

From the country

• For interior and exterior use
• increases adhesion
• does not cause yellowing of paints
• equalizes water absorption
• creates a transparent film

Film color

Transparent (after drying)

Density

1.01 kg / l

Binder

Acrylic dispersion

Composition

Acrylic dispersion, additives, water

Solvent (thinner)

Do not dilute

Base

Preparation of the foundation is carried out according to DBN V.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. The surface must be strong, dry and clean. Carefully remove old and fragile coatings, glue paint, efflorescence, wallpaper and other contaminants. Clean the places affected by fungi with düfa Schimmelentferner and treat with düfa Grund Antiseptik D613 antiseptic primer according to the instructions.

Drawing

The primer is applied with a roller, brush, brush or spray. Before starting work, the material must be mixed. Do NOT dilute with water! Strongly absorbing surfaces to process in several layers with an interval of 2 hours.

Consumption

Consumption – 100-200 ml / m², depending on the base

Note

Do not dilute with water! Coloring or other work should begin no earlier than 4 hours after the application of the last coat of primer.

Tool cleaning

Wash the tools after work.

Drying time

4 hours at + 20 ° С and relative humidity of 60%, in other conditions the drying time may change.

Application temperature

Work should be carried out at a base temperature from + 5 ° С to + 35 ° С and relative air humidity up to 80%.

Tinting 

–

Packing

1 l; 5 l; 10 l

Storage

In a tightly closed container at a temperature of + 5 ° C to + 35 ° C. Warranty period of storage in hermetically sealed original packaging is 24 months.

Security measures

Keep out of the reach of children. Do not allow primer to get into eyes or on skin. Do not pour the primer onto the ground, into the water course or into the sewer system.

Recycling

Do not pour the primer onto the ground, into the water course or into the sewer system.