Filler «ВЛ – 10»
October 26, 2018
Acrylic interior varnish
October 26, 2018
Acrylic “Gel-Azure”
High-quality acrylic “Gel-Lazur” for effective protection and decorative finishing of wood inside and outside the premises.
FEATURES
-
- COMES A WOOD TO THE WOOD, UNDERLINES NATURAL TEXTURE;
-
- PROVIDES EFFECTIVE PROTECTION AGAINST UV-RADIATION;
-
- RESISTANT TO ATMOSPHERIC IMPACT AND TEMPERATURE DIFFERENT;
-
- ECOLOGICALLY SAFE MATERIAL, ODORLESS, QUICK DRYING;
-
- FORMATES A SILKY – GLOSSY COVERING;
-
- AT THE EXPENSE OF THE GEL CONDITION EASILY APPLIED, DOES NOT DRAIN FROM THE BRUSH.
It is recommended for wooden facades, block-houses, fences, garden furniture, interior elements and other products, structures made of wood.
It can be used as a tinting agent before applying acrylic lacquers.
Not recommended as a standalone coating:
– for painting surfaces with high operating loads (floors, stairs, etc.)
– for surfaces outside the premises – colorless “Gel-Azure”.
APPLICATION
“Gel – Azure” is ready for use, before use – mix thoroughly and hold until air bubbles are removed.
For the surface being painted for the first time: sand, remove dust and other contaminants. If necessary, process the surface with a universal antiseptic TM Miks color. “Gel – Azure” apply evenly in 2-3 layers, avoiding drips. Grinding of the surface between the layers is carried out with a fine fine-grained sanding paper Р220 – Р360. Interlayer: 2-3 hours. If it is necessary to obtain a less intense color, it is recommended to add colorless up to 30% to the color “Gel – Azure”.
To update previously painted surfaces: remove particles of old peeling coating, sand and clean the surface from dust and other contaminants. Significantly damaged coating must be completely removed. To process a surface universal antiseptic TM Miks color. To apply an azure in 2 layers with an interval of 2 – 3 hours.
During the work and after their completion – thoroughly air the room.
Wear rubber gloves to protect hands.
Tool cleaning: water with detergent.
