The soil of deep penetration 1: 6 (concentrate) POLYCOLOR is intended for preliminary treatment of porous and highly absorbent surfaces of concrete, plaster, brickwork, and also as a basis for mortars.
Strengthens and stabilizes the basis, and also increases adhesion (coupling) of the finishing materials applied on this basis. Aligns water absorption. Increases durability and reduces the consumption of the finish coating. Improves the properties of mortars.
Remove dust, dirt, grease stains and all fragile parts of old paintwork coatings from the painted surface. Moss, mold, “efflorescence” or algae are removed without residue by mechanical means. The affected areas are treated with a bioprotective agent. Defects of a surface to eliminate with the help of putty. To grind a surface, to remove dust.
Stir the primer before use. Depending on the porosity of the surface, the concentrated primer will be diluted with water in a ratio of 1: 3 … 1: 6. During the work, the temperature should not be below +5 ?. After completing the work, rinse the tools with water.
brush, roller, spray gun.
at a temperature of + 20 and a relative humidity of 65%, the drying time of the primer layer is 1 hour
0.1-0.2 l / m2 with a single layer coating.
Store in tightly closed factory containers, protected from heat and direct sunlight at a temperature not lower than +5? and no higher than 35 ?. Keep from freezing
Warranty period of storage 18 months
1 l, 2 l, 5 l, 10 l