Primer EP-057
September 3, 2018Primer EP-45
September 3, 2018
Primer EP-076
Suspension of pigments and fillers in an epoxy resin solution in organic solvents. The material is two-pack and comes in the form of two components: a semi-finished primer and hardener No. 2 mixed immediately prior to use.
Purpose (EP-076)
Priming products from steel, magnesium and titanium alloys, used in various climatic zones.
Application
Apply to the prepared surface with a spray gun. Work in personal protective equipment including respirator and rubber gloves. Do not allow material to enter the organs of digestion and respiration. It is forbidden to work near an open source of fire.
Technical characteristics (EP-076)
| Name of the indicator | Value |
| The appearance of the coating | homogeneous smooth film without foreign inclusions |
| Colour | yellow |
| Viscosity by viscometer VZ-4 at a temperature of (20 ± 2) ° С, s, not less | 14-20 |
| Content of volatile substances,%, not less | 48-54 |
| milling degree, µm, not more | 35 |
| Drying time at temperature (20 ± 2) ° С, h, not more than | 6 |
| Film hardness, usl. units, not less | 0.6 |
| Cover bend, mm, not more | 3 |
| Film strength at impact, N * m, not less | five |
| Film resistance to action at a temperature of (20 ± 2) ° С, h, not less | |
| Water | 24 |
| Mineral oil | 24 |
| Gasoline | 24 |
| Viability of the primer after the introduction of the hardener, at a temperature of (20 ± 2) ° C, h, not less | 24 |
