Enamel AC-554

The enamel AC-554 retains its properties in the best way in the following coating system:

• one ball primer VL-02, AK-070 or AK-069
• 2 coats of primer АС-071 or enamel АС-599 of white color
• 3 layers of enamel AC-554

In order to increase the resistance to fading and increase the durability of the surface, which is used in atmospheric conditions, AC-554 enamel is recommended to apply 2 layers of AC-528 lacquer.

Application

The surface must be dry, degreased and free from dirt, dust and other contaminants. Enamel must be thoroughly stirred throughout the volume of the container. Enamel can be applied with a paint sprayer, brush or in bulk. If the treated surface is painted and sanded, then it is possible not to use VL-02, AK-070 and AK-069 phosphating primers. Work in personal protective equipment using a respirator and rubber gloves. Prevent material from entering the respiratory and digestive organs. To the workplace to ensure a constant flow of fresh air. It is forbidden to work near an open source of fire.

 

Specifications
Composition	Acrylic varnish, fluorescent pigment, plasticizer, stabilizer
Colour	Orange red
Dry residue	(31-35)%
Relative viscosity	(40-70) with
Solvent	xylene
Packaging	40 kg
Shelf life	6 months from date of manufacture

Application guide
Application Methods		Working viscosity (VZ-246)
	pneumatic spraying	(18-20) with
Working conditions	Temperature during the work from -15 ° C to +30 ° C
Drying time	At a temperature of (18-22) ° С and relative air humidity not more than 65%: – the first and the second ball – up to 1 hour; – the third ball – up to 24 hours.
Enamel consumption	On a single-layer coating – (120-140) g / m ?.
Complex coating thickness	(100 – 130) microns when applied by pneumatic spraying
Cleaning tools	xylene