Acrylic enamel for radiators is used for decorative and protective painting of primed or previously painted radiators and elements of heating systems, as well as primed metal, wooden and mineral surfaces inside and outside the premises.
High-quality enamel has a high degree of whiteness. Does not yellow with over time. Forms resistant to temperature (no more than 80) and mechanical loads, waterproof, glossy finish. Possesses resistance to water and washing with household detergents. Environmentally friendly product.
The painted surface should be dry, thoroughly cleaned from dust, rust, scale, grease and other contaminants. Surfaces, previously painted with alkyd or oil paint, to sandpaper to haze.
Before use, the enamel should be thoroughly mixed, if necessary, diluted to working viscosity with water, but not more than 10%. Enamel applied in 1-2 layers. The second layer is applied after the first layer has dried for 2 hours. It is not recommended to paint heated heating systems.
brush, roller, spray gun.
at a temperature of + 20 and a relative humidity of 65%, the drying time of one layer is 1-2 hours.
1 liter of 8-10 m2 with a single layer coating.
Enamel should be stored and transported in tightly closed original containers, protected from heat and direct sunlight at a temperature not lower than + 5 and not higher than + 35. Protect from freezing!
Keep enamel out of the reach of children. In case of contact with eyes, rinse immediately with clean water. Container from under the enamel is utilized in the collection points of household waste.
Warranty period of storage 18 months
White, can be tinted with water pigment pastes.
0.75 l