Porozapolnitel VL-10

For impregnation of wood to fill the surface pores and leveling the surface.

To ensure the ability of wood surfaces to grinding without residues of pile and wood dust.

To reduce the number of layers of paint and varnish materials when applied to wooden surfaces.

Properties

• Maximum smooth surface after grinding;
• Fast drying;
• Lack of pile when grinding;
• Lack of accumulated wood dust in pores when grinding;
• Maximum surface alignment;
• Absence of a precipitate and a surface film during prolonged storage.

Technical data
Stock	Polyvinyl butyral, organic solvents
Dry residue	5-10%
Conditional viscosity	Not less than 20 s
Packaging	2.1 kg
Guaranteed shelf life	9 months from the date of manufacture

Instructions for using the filler pen
Methods of drawing		Working viscosity (VZ-246)
	portage, penzel	The material is ready for use
Working conditions	Air temperature at dyeing from 15 ° С to 25 ° С and relative humidity from 60% to 70%
Duration of drying	At a temperature (18-22) ° C and a relative humidity of no more than 65% – up to 1.5 hours. The lower temperature and higher humidity of the air prolong the drying time
Consumption of the filler	On a single layer coating – (90-120) g / m?
Thickness of single-layer coating	(10 – 20) μm For quality coverage enough 1-2 layers of filler.
Cleaning tools	РФГ

Surface preparation
If necessary, treat antiseptic with a universal MIX color. Grind off grinding skins, clean from wax, wood dust, dirt .

Preparation of filler
mix thoroughly.