Alkyd enamel «КОРАБЕЛЬНАЯ»
October 17, 2018
Alkyd enamel for radiators «КОРАБЕЛЬНАЯ»
October 17, 2018
Enamel alkyd PF-266
PURPOSE:
PF-266 alkyd enamel is made on high-quality alkyd resin using imported and domestic pigments and special target additives. Enamel is intended to cover painted and unpainted wooden floors, as well as other wooden surfaces that are used indoors.
PROPERTIES:
Forms a durable, wear-resistant glossy coating resistant to abrasion and detergents. Economical consumption
SURFACE PREPARATION:
The surface to be treated must be dry.
– Grind new surfaces, remove dust.
– Remove fragile parts of old paintwork coatings from painted surfaces.
Defects and irregularities to eliminate with putty on wood. Sand, clean from dust and dirt.
MODE OF APPLICATION:
Before using the enamel, mix thoroughly, if necessary, dilute to working viscosity with white spirit, solvent or their mixture in a 1: 1 ratio. Enamel applied in 1-2 layers. The second layer is applied after the first layer has dried for 24 hours.
APPLICATION METHOD:
brush, roller, spray gun.
DRYING TIME:
at a temperature of + 20 and a relative humidity of 65%, the drying time of one layer of enamel is 24 hours.
CONSUMPTION:
Enamel consumption for single-layer coating -70-150 g / m2, depending on the color and type of surface.
STORAGE:
Enamel is stored and transported in a tightly closed container, protecting from moisture and direct sunlight. Keep away from fire!
PRECAUTIONARY MEASURES:
When carrying out painting works, as well as after their completion, it is necessary to ventilate the room thoroughly. Wear rubber gloves to protect hands.
Dispose of the closed container in the collection points for household waste.
WARRANTY PERIOD:
Warranty period of storage 18 months
COLOUR:
Tan brown red brown
PACKING:
0.25 kg, 0.9 kg, 2.8 kg, 50 kg
