Enamel NC-184

SPECIFICATIONS:

The appearance of the film	uniform smooth surface
Viscosity with a nozzle diameter of 4 mm at a temperature (20.0 + 0.5) 0 С, s	50-110
Mass fraction of nonvolatile substances,%	14,5-20
Drying time to degree 3 at a temperature of (20 + 2) 0С, h	one
Film strength at impact, cm, not less	40
Gloss of film,%, not less	60
Enamel film resistance to variable rates	no cracking, peeling and peeling of the film is observed

 

APPLICATION:

Enamel is applied to the surface by spraying. If necessary, diluted with solvent 646. The consumption of a single-layer coating is 129-178 g / m2.

 

In accordance with the reference literature (“Paint coatings. Technology and equipment” ed. Moscow. Chemistry 1992)

 

ALLOWED:

 

• • The use of coatings in temperate zones.

 

• • The use of enamel on primers GF-021, AK-070, VL-02.

 

This ensures that the system is not subject to temperature differences (-400С + 600С); exposure to industrial oil at a temperature of 1000C.

 

STORAGE:

Warranty period of storage 6 months from the date of manufacture.