Products

Enamel NC-25
October 2, 2018
Enamel NC-184
October 2, 2018

Enamel NC-132

Composition

Enamel NC-132 is a suspension of SVP (pigment, flared with nitrocellulose, plasticizer and dispersant) in a solution of colloxylin and alkyd resin in a mixture of organic solvents with the addition of plasticizers.

Enamel quick-drying, not afraid of water. Shelf life – 12 months from the date of manufacture.

Type: white, yellow, golden yellow, purple, orange, red, cherry, light blue, blue, gray blue, sea wave, pale green, light green, green, pistachio, tobacco, protective, khaki, light gray, dark gray, red-brown, black. 

Categories: ,

Purpose (SC-132)

Enamel NC 132 is designed for processing wood and metal parts and structures. Protects the surface from the effects of the atmosphere, water, detergents, withstands grinding and polishing. It can be used both inside and outside the premises.

Application

Before painting, the treated surface must be thoroughly cleaned of dust, dirt, peeling paint and corrosion. The metal surface before applying the enamel must be necessarily coated with a primer. Enamel mix until smooth throughout the volume of the container. Depending on the color, the consumption of enamels on one layer is 30-120 g / m ?. Work in personal protective equipment (respirator, gloves). Provide fresh air when working indoors. It is forbidden to apply the enamel NTs-132 on the surface, which was previously painted with oil paints.

Specifications (NTs-132)

No Name of the indicator Value
one Film color Within the limits of permissible deviations established by the samples (standards) of the color of the “card index” or approved color samples.
2 The appearance of the film Smooth, uniform, without wrinkles and foreign inclusions.
3 Conditional viscosity according to the viscometer of the type VZ-246 with a nozzle diameter of 4 mm, at a temperature of (20.0 ± 0.5) ° C, not more than, (s) NC 132 K – 100-150 NC 132 P – 60-100
four Mass fraction of nonvolatile substances, (%) black &? 21-31 red – 26-38 other colors – 29-42
five Film hardness by pendulum device type TML (pendulum A), not less, (relative units) 0.3
6 Drying time to degree 3 at a temperature of (20 ± 2) ° С, (h) to degree 3 – 2 to degree 4 – 24
7 Resistance of the coating at a temperature of (20 ± 2) ° C to static effects water – 1 industrial oil – 6 
up