Enamel PF-133

Purpose (PF-133)

 

PF-133 enamel is for the car building and other industries. Containers and other metal surfaces. Also suitable for painting

 

Application

 

It must be completely free of dirt and dust. Purified from corrosion and old paint. Before the tare volume. Xylene, nephras A 120/200, it is not necessary to exceed 50% RE-4B and RE-3V when painted in electric current. Enamel can be applied in various ways. Spray drenching, air dripping, air dripping, air dripping, air dripping, air dripping, air dripping Enamel consumption for single-layer coating – (60-80) g / m?Drying the coating for 30 hours at a temperature of (20 ± 2) ° C.

 

Work in personal protective equipment (respirator, rubber gloves). It is forbidden to work. During the work, to ensure that the workplace.

 

Specifications (PF-133)

 

No	Name of the indicator	Value
one	Film color	Must be established at the rules of the card index
2	The appearance of the film	After drying, it should be smooth, uniform, glossy, without wrinkles, smudges and inclusions.
3	Enamel film gloss not less, (%)	blue, green, pistachio, light smoky, dark gray – 50; other colors – 40.
four	VZ-246 with a nozzle diameter of 4 mm, at a temperature of (20.0 ± 0.5) ° C, not more than, (s)	black – 40-80, other colors – 60-110
five	Mass fraction of nonvolatile substances, (%)	yellow – 60-67; light yellow, red-brown 632 – 56-62; orange 59-67; red-brown 652 – 55-62; red – 54-60;blue, sea waves – 55-61; blue – 57-64; green – 60-68; pistachio 56-66; light smoky – 53-62; dark gray – 57-65; dark green – 61-69; Khaki – 59-66; black – 46-53.
6	Milling degree, not more, (µm)	thirty
7	Hookability of the dried film, (g / m?)	red – 120; light yellow – 100; orange – 90; yellow, green – 70; dark green – 65;blue, celadon, pistachio, light smoky, dark gray – 60; Khaki – 50; red-brown, blue – 40; red-brown 1 – 30; black – 20.
eight	Drying time to degree 3, (h)	at a temperature of (82 ± 2) ° C: black – 2; other colors – 1.5. at a temperature of (20 ± 2) ° C: red-brown 1 – 30;other colors – 24.
9	Enamel film elasticity at bending no more, (mm)	one
ten	Film durability device not less, (cm)	50
eleven	Film hardness device of the type: (cond. Units)	for black and red enamels:  M-3 – 0.2; TML (pendulum A) – 0.05. for other colors: M-3 – 0.35;TML (pendulum A) – 0.15.
12	Adhesion of coating (points)	one
13	The resistance of the coating at a temperature of (20 ± 2) ° C to static effects,	water – 10 (h); industrial oil at least – 24 (h)