Enamel NTs-184 black
(GOST 18335-83)
PURPOSE:
For painting cast parts of cars, as well as pre-primed metal surfaces of other products used in atmospheric conditions.
SPECIFICATIONS:
The appearance of the film | uniform smooth surface |
Viscosity with a nozzle diameter of 4 mm at a temperature (20.0 + 0.5) 0 С, s | 50-110 |
Mass fraction of nonvolatile substances,% | 14,5-20 |
Drying time to degree 3 at a temperature of (20 + 2) 0С, h | one |
Film strength at impact, cm, not less | 40 |
Gloss of film,%, not less | 60 |
Enamel film resistance to variable rates | no cracking, peeling and peeling of the film is observed |
APPLICATION:
Enamel is applied to the surface by spraying. If necessary, diluted with solvent 646. The consumption of a single-layer coating is 129-178 g / m2.
In accordance with the reference literature (“Paint coatings. Technology and equipment” ed. Moscow. Chemistry 1992)
ALLOWED:
This ensures that the system is not subject to temperature differences (-400С + 600С); exposure to industrial oil at a temperature of 1000C.
STORAGE:
Warranty period of storage 6 months from the date of manufacture.