One-component silicate seal. Purpose: sealing and sealing of thermal joints in fireplaces, stoves, chimneys, ventilation systems inside and outside the premises.
good adhesion to porous and non-porous surfaces: brick, cement, concrete, stone, metal, glass, ceramics. Not painted. Not elastic. The added synthetic fibers increase its gas-tightness, prevent shrinkage and stretching after hardening. Not applicable to structures subject to constant pressure – central heating systems, boilers, gas installations.
Consistency | black paste |
Composition | liquid glass, kaolin,
fiberglass |
Density | 2.00 g / cm3 |
Working temperature | + 5 ° С / + 40 ° С |
Heat resistance | up to + 1250 ° С
after complete curing |
PH value at 20 ° C | about 12 |
Dynamic viscosity at 20 ° C | 600 mPas |
Time of processing | about 5 min |
Solidification time | about 24 hours * |
Solvent | water |
Storage temperature | + 5 ° С / + 30 ° С |
Shelf life | 18 months |
* depending on the layer thickness and environmental conditions |
Application:
clean and degrease the surface. Trim the cartridge above the thread. Cut off the tip to the width of the seam and screw it onto the cartridge. Extrude with a pistol. Porous surfaces (plaster, concrete) should be slightly moistened with water to improve adhesion of the sealant. Smoothing the seam with water is allowed. Avoid heating uncured sealant.
Attention!
R36 / 38 The product causes eye and skin irritation. S2 Keep out of the reach of children. S24 / 25 Avoid contact with skin and eyes. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37 Wear suitable protective gloves. S46 If swallowed, seek medical advice immediately and show this container or label.
Logistic information
packing | packaging | number on pallet | barcode | gross weight |
plastic cartridge
with a tip and a cap |
cardboard box | 120 boxes | things
4820085760196 |
things
0.61 kg |
280 ml | 12 pcs. In the box | 1440 pcs. | box
4820085763531 |
box
7.80 kg |