Interior paint for walls and ceilings resistant to washing «POLYCOLOR»

PREPARATION OF THE SURFACE:

Painted surface:

Leave the new plaster unprocessed for 28 days. Removes dust, dirt and grease stains. Defects of a surface to eliminate with the help of putty. To grind a surface, to remove dust. To level the absorbency, increase adhesion and surface strengthening, it is necessary to treat it with a “Polycolor” or “Comfort” deep penetration primer.

 

Painted surface: Painted to

remove dust, dirt, grease stains and all fragile parts of old paintwork. Defects of a surface to eliminate with the help of putty. To grind a surface, to remove dust. To level the absorbency, increase adhesion and surface strengthening, it is necessary to treat it with a “Polycolor” or “Comfort” deep penetration primer.

 

METHOD OF APPLICATION:

Before use, thoroughly mix the paint, if necessary, dilute with water (no more than 10%). Paint applied in 1-2 layers. First paint with a brush or a small roller the junction of the ceiling with the walls and corners. Then the paint is applied to the entire surface is painted with a roller, starting from the window. The second layer is applied after drying the first layer within 1:00. During the work, the temperature should not be below +5 0С. After completing the work, rinse the tools with water.

 

Method of application:

brush, roller, airless spray.

 

Drying time:

At a temperature of 20 ℃ and a relative humidity of 65%, the drying time for one coat of paint is 1:00.

 

CONSUMPTION:

140-170 g / m2 with a single-layer coating, depending on the type of surface.

 

STORAGE:

Store in tightly closed original containers, protected from heat and direct sunlight at a temperature not lower than + 5 and not higher than 35. Protect from freezing!

 

COLOR:

White, can be tinted with water pigment pastes

 

Warranty period:

Warranty period of storage 18 months

 

PACKING:

1.4 kg, 4.2 kg, 7 kg, 14 kg