MIKS facade paint
September 3, 2018
Enamel alkyd PF-115
September 28, 2018
Paint water – dispersive VD – AK – 111
Based on copolymer acrylate dispersion.
Purpose: The paint is intended for interior and exterior painting of buildings and structures on brick, concrete, plastered, wood and other porous surfaces (except floors), on primed metal surfaces, on old coatings.
The coating of a smooth uniform matte surface. It is produced completely ready for use. Resistant to light wet wiping.
description
Physicochemical properties
| Name of the indicator and unit of measurement | norm |
| Colour | white |
| appearance | Smooth matte finish |
| Mass fraction of nonvolatile substances,% | 52 – 57 |
| paint pH | 8.0 – 9.0 |
| Hiding power Dried films, g / m2, not more | 100 |
| Film resistance to static effects of water, at a temperature of (20 ± 2) ° С, h, not less | 24 |
| Paint frost resistance, cycles, not less | five |
| Conventional light resistance (change in diffusion reflection coefficient),%, not more than | five |
| Milling degree, µm, not more | 60 |
| Drying time to degree 3 at a temperature of (20 ± 2) ° С, h, not more | one |
Colour
White. Undercooling of white inks with water pigment pastes is allowed.
surface preparation
Clean and degrease the surface.
paint preparation
- Mix thoroughly;
- If necessary, diluted to the desired viscosity with water.
applying
The paint is applied on a primed or unprimed surface in one or two layers.
It is possible to use VD-AK-111 as a primer with diluted water at a ratio of 1:10.
methods
- Manual (brush or roller)
- By spraying (air or airless).
Material consumption on a primed flat surface.
- On one layer of 110 – 150 g / m2;
- On two layers of 250-300 g / m2.
Security Details
In the cured state, the paint film is non-toxic, fireproof.
Shelf life 12 months.
GOST 28196-89.
