Products

Acrylic impregnation (Dufatex Aqua)
September 3, 2018
Primer alkyd for wood “BASE”
September 3, 2018

Antiseptic for wood “GUARD-2 (BS-13)”

Purpose:  protection of wood from sapwood mushroom coloring and mold for the period of atmospheric drying or transportation in the wet state. 

Properties:

Antiseptic “BS-13” – water-soluble, 2-component impregnating composition. Odorless, has high permeability to wood, low corrosivity to ferrous metals, wood does not stain, impregnated wood is easily glued and painted. Freshly sawn wood treated with BS-13 antiseptic no later than 12 hours after sawing is not affected by coloring fungi and mold during the period of atmospheric drying or transportation in the wet state. Processing of wooden structures with the preparation “BS-13” increases the service life of wood by up to 50 years, depending on the absorption (content) of the preparation by wood, the method of application and the conditions of its operation. The preparation “BS-13” refers to the means of the I-II group of fire-retardant efficiency for wood according to GOST 28815-96

Consumption 20-40 g / m2
Application Method brush, dipping, spraying, under pressure
Efficiency secures the value of fresh timber

Application technology:

A solution of the antiseptic preparation “BS-13” is prepared at the place of consumption by dissolving the dry composition in warm (50-60 ° C) water per 1 kg of the composition 9 l of water. In the prepared solution, the presence of fine sediment and mechanical impurities. The obtained impregnating solution is thoroughly mixed and applied to the cleaned from dust, chalk, lime, paint, etc. wood surface in an even layer without gaps using a brush, roller, sprayer at a time or by immersion in the solution no later than 12 hours after sawing. Treated sawn timber to protect from direct exposure to precipitation. The temperature of the impregnating solution should not be below +10 ° C. Impregnation of frozen and icy wood is not recommended. Do not allow antiseptic to penetrate structures and materials that are not impregnated.

Норма расхода:

При пропитке древесины способом нанесения на поверхность кистью, валиком, распылением, погружением в раствор расход сухого антисептика 20—40 г/м2.  Расход пропиточного раствора — 200—400 г/м2.

Техника безопасности:

Antiseptic solutions “BS-13” refers to low-hazard substances. In compliance with the requirements of safety, industrial hygiene and personal hygiene, working with a solution of this antiseptic does not affect the health of workers. Solutions of antiseptic “BS-13” is not flammable and not explosive. To work with the antiseptic “BS-13” are allowed to male persons not younger than 18 years old, have passed a medical examination, trained in the rules of handling chemicals. Work in the open air or in a well-ventilated area, using personal protective equipment: clothing, rubber gloves, goggles, respirators. Follow the rules of personal hygiene.

Storage:

BS-13 antiseptic is stored in tightly closed labeled containers. Shelf life is not limited. Antiseptic solutions “BS-13” are stored in a heated room in sealed labeled containers. Guaranteed shelf life of the solution – 6 months from the date of manufacture. 

up