Filling MS-006 pink
October 1, 2018
Putty NC-008
October 1, 2018
PURPOSE:
For leveling and correcting wooden surfaces during their finishing (for furniture and other products), in coating systems operated in atmospheric conditions and indoors.
SPECIFICATIONS:
| The appearance of the filler coating | after drying, the surface should be smooth, uniform, free of bubbles, scratches, cracks and mechanical impurities |
| Viscosity according to the viscometer of the type VZ-246 with a nozzle diameter of 6 mm at a temperature of (20 + 0.5) 0 С, s, not less | 30-70 |
| Mass fraction of nonvolatile substances,% | 63 |
| Drying time to degree 3, no more, at a temperature (20+ 2) оС, hour | 3 |
| Heat resistance at temperature 65-700С, h, not less | eight |
| Ability to be ground | polished without water |
APPLICATION:
Putty is applied to the surface with a spatula or in bulk.
If necessary, diluted with acetone, solvent 645, 646. The consumption of a single-layer coating is 400-600 g / m2.
STORAGE:
Warranty period of storage 6 months.
