Products

Alkyd urethane yacht varnish
October 17, 2018
Drying oil «OKSOL»
October 17, 2018

Varnish PF-170

PURPOSE: 

PF-170 lacquer is intended for obtaining weather-resistant coatings on a previously prepared surface of metal and wood, and as an additive to glyptal and pentaphthalic enamels to enhance the gloss of coatings.

PROPERTIES:

Gives shine to coatings. Emphasizes natural wood structure 

SURFACE PREPARATION:

Wooden surfaces:

– The surface must be dry

– To grind new surfaces, remove dust, dirt. From the painted surfaces to remove fragile parts of the old paint coatings. Sand, remove dust, dirt.

Defects and irregularities to eliminate with putty on wood. Sand, remove dust, dirt. Prime with primer GF-021.

Metal surfaces:

– Remove new surfaces from dust, dirt, scale, degrease.

– Remove the fragile parts of old paintwork coatings, loose and flaking rust from painted surfaces. Remove dust, dirt and degrease.

MODE OF APPLICATION: 

Before using the varnish, mix thoroughly, if necessary, dilute to working viscosity with white spirit, solvent or their mixture in a 1: 1 ratio. Apply lacquer in 2-3 coats. Apply the next coat after drying the first coat for 4 hours.

APPLICATION METHOD:

brush, roller, spray gun.

DRYING TIME: 

at a temperature of + 20 and a relative humidity of 65%, the drying time of the paint layer is 6 hours.

CONSUMPTION: 

50-100 g / m2 with a single layer coating

STORAGE: 

Store and transport in a tightly closed original container, protected from heat and direct sunlight. Keep away from fire!

COLOUR:

Colorless

WARRANTY PERIOD:

Warranty period of storage 12 months

PACKING:

0.4l, 0.7l 

up