Tinted impregnation

UNIQUE PROPERTIES

• contains active substances (fungicides) to protect the wood from mold, blue and rot
• protects wood from weathering and wood pests
• imitates valuable wood species while preserving its natural texture
• deeply absorbed into the surface
• no strong smell

SPECIFICATIONS

Film-forming:	alkyd varnish
Solvent:	White Spirit
Application Method:	sponge, brush, paint sprayer
Consumption for single-layer coating:	sawn wood – 1 l per 4-8 m 2
Consumption for single-layer coating:	planed wood – 1 liter for 8-12m 2
Drying time of one layer at a temperature of (20 ± 2) ° C and relative humidity of air (65 ± 5)%:	8 ocloc’k
Warranty period of storage:	36 months from date of manufacture

TU U 24.3-32318370-003: 2007

RECOMMENDATIONS FOR USE

Surface preparation	The surface to be treated should be dry (humidity not more than 20%), previously cleaned from dirt, dust, mold, fungi, etc. To ensure better adhesion, remove from the surface an old layer of wood protection agent, old paint, as well as destroyed or grayed wood. To grind with a fine-grained emery cloth, to remove dust from grinding. To ensure a systemic protective effect, a new or cleaned wooden surface should be primed with a wood-protective base.
Mode of application	Before painting, make sure that the primed surface is dry. Before use and during work, protect the wood protection agent thoroughly. The tool is ready to use, if necessary, diluted with white spirit. Apply evenly with a brush, sponge or paint sprayer in 1-2 thin layers with intermediate sanding. If you need a darker tone, it is possible to apply the agent in 3 layers. Means to be applied on the surface in a continuous layer along the wood fibers, avoiding the partial overlap when coating surfaces. Careful treatment of the ends of wooden flooring significantly increases the resistance of wood to moisture. Avoid staining in windy weather, as well as under the influence of direct sunlight. Working tools after work is cleaned with white spirit, the dried layer can only be removed mechanically.
Storage conditions	Store in tightly closed containers of the manufacturer, protecting from moisture and direct sunlight, away from food, in places inaccessible to children.
Precautionary measures	Fire hazardous Keep away from fire! When carrying out painting works, and also after their completion, it is necessary to air the room thoroughly. Wear rubber gloves to protect hands.
Recycling	Dispose of dried residues and empty containers as construction waste.