Etching paste for removing polyurethane, epoxy and other paints Turco 5873 NC
October 2, 2018Enamel AC-1115
October 2, 2018
Chemical Resistant LCP Remover – CeeBee e-2060
COMPOSITION:
Non-toxic, hydrogen-activated peroxide neutral substance to remove polyurethane, epoxy and other chemically resistant paint coatings.
ADVANTAGES OF THE MEANS:
-
- Does not contain halogen solvents, phenols, heavy metals or other toxic materials.
-
- Perfectly removes polyurethane, epoxy and other paint-and-lacquer coatings.
-
- Keeps on vertical, inclined and inverted planes.
-
- It dries slowly, which is guaranteed maximum reaction time.
-
- Safe for all metals commonly used in aircraft manufacturing, including high-strength steels, with the exception of magnesium.
APPLICATION:
-
- Optimum results are achieved at a temperature of from 24 to 30 C.
-
- The treated surface must be clean and dry.
-
- Spray a thin layer of washer, starting from the bottom of the fuselage up. Apply the remover.
-
- Keeps the surface moist until the paint begins to deform.
-
- It can be taken from 1 hour to 8 hours.
-
- If necessary, the paintwork has not been completely departed.
-
- When it comes to paint, it can be used to remove paint and wash.
-
- If necessary, it is recommended to use the Super Bi-210B or Ce-Wee -280. Thoroughly rinse the surface with a stream of water.
CHARACTERISTICS OF THE MEANS:
Thick, white liquid with a pleasant mild odor. Not lit, pH: 4.2-6.0.
EQUIPMENT:
-
- apply an air supply unit under pressure (10: 1 or 5: 1), having a 0.5 inch hose and a spray nozzle;
-
- apply a wash at a pump inlet pressure of 80 to 110 psi.
-
- You can use an airless paint sprayer with a nozzle of 0.023-0.025 mm (0.584-0.635 inches) and a spray can and spray gun can be removed.
PRECAUTIONARY MEASURES:
Store it out, in direct sunlight, out of direct sunlight, fire or heaters.