Brunox epoxy

This black, very compact protective layer guarantees corrosion protection and at the same time it is an excellent primer due to epoxy resin. It is very suitable for overhaul mechanisms, for equipment, vehicles. Due to its excellent ability to penetrate the pores of rust and excellent layer (not visible traces of the brush) ensures high efficiency and level of future use. Remove loose rust, grease stains, dirt and loose paint with a metal brush, grinder and. etc. For the remaining rust pores, apply 2-3 layers of BRUNOX epohy with a brush, roller, gun or spray several layers of a convenient BRUNOX epohy aerosol spray that does not contain chlorinated fluorocarbons. BRUNOX epohy is suitable for immersing and sealing hidden cavities. A drug, anti-corrosion and primer at the same time. Made on the basis of epoxy resin with the latest technology. Creates a uniform organometallic coating from particles of neutralized corrosion. It penetrates deeply using the capillary effect, this penetration ensures a great end result, and facilitates the application of a paint and varnish coating. It does not contain heavy metals and mineral acids, has an unlimited storage time, is soluble in acetone and other solvents, does not react with paint and varnish coatings and the primer is putty. this penetration ensures a great end result, and facilitates the application of a paint and varnish coating. It does not contain heavy metals and mineral acids, has an unlimited storage time, is soluble in acetone and other solvents, does not react with paint and varnish coatings and the primer is putty. this penetration ensures a great end result, and facilitates the application of a paint and varnish coating. It does not contain heavy metals and mineral acids, has an unlimited storage time, is soluble in acetone and other solvents, does not react with paint and varnish coatings and the primer is putty.

Mode of application:

1. 1. Remove loose rust and loose paint.
   2. Apply Brunox epoxy twice to the surface.
   3. Let it dry.
   4. Drying time depends on the temperature and humidity of the surface.
   5. An hour later, in order to accelerate drying, you can heat the surface to 180 gr. C for 10 minutes.
   6. After use, rinse the brush in water.
   7. Apply to the surface treated with Brunox epoxy paintwork.

Brunox epoxy is available both in conventional containers (100 ml packaging) and in aerosol, (150 ml packaging).

BRUNOX recommend:

1. 1. ABB ABB Corporate Research Ltd. Szwajcaria Baden (scientific research)
   2. ABB Unifier AG Szwajcaria Baden (service center)
   3. Deutsche steinkohle AG Niemcy Saarbrucken (Coal Mine)
   4. FIAT-SING Schienenfahzeuge AG Szwajcaria Neuhauisen aR (car production)
   5. Hamburger Verkehrsbetrieb Niemcy Hamburg (service)
   6. LEGO Szwajcaria Steinhausen (продукция)
   7. Mercedes DIAMLER CHRYSLER Niemcy Stuttgard (производство автомобилей)
   8. Philippe Patek S.A Szwajcaria Grand Lancy (Часы)
   9. Plansee A Austria Tirol
   10. Rohm Gmbh Niemcy Sondheim (продукция)
   11. ROLEX Industrie S.A. Szwajcaria Cenf (часы)
   12. Siemens AG Niemcy ST. ingbert (продукция)
   13. Sulzer Pumpen AG Szwajcaria Winterthur (производство помп)
   14. SWAROVSKI & CO Wattens (производство кристаллов)
   15. Swisscom Szwajcaria Braina (электронный сервис)
   16. Thyssen Krupp Stahl AG Niemcy Duisburg (продукция)
   17. Wolf — Garten Niemcy Betzdorf ( садоводство)
   18. VW Volkswagen AG Niemcy Wolfsburg (производство автомобилей)
   19. Weidman AG Szwajcaria Raperswil (производство пластмасс)
   20. Grillo-Werke Aktiengesselschaft Niemcy Dusburg (products)
   21. Schweizerische Bundesbahnen SBB Szwajcaria Basel (railway production)

Specifications

Main
Manufacturer	Brunox AG
Producing country	Switzerland
Type of	Primer
Volume	150.0 (ml)
Release form	Spray
Type of primer	Bicomponent