Soil enamel “Uralkor”

The coating of two layers of primer-enamel, applied to the prepared surface, ensures corrosion protection in cold and temperate climates for 3 years.

Properties:

• High adhesion and mechanical resistance;
• The possibility of using the material as an independent coating;
• Quick-drying material;
• The resistance of the coating to the action of water and transformer oil;
• No sediment and surface film during long-term storage;
• The resistance of the film to a temperature change from minus 45 C to 60 C;

Technical details:

Composition	Alkyd-urethane semi-finished varnish, pigments, fillers, solvents, sativa and other targeted additives
Dry residue	56-64%
Relative viscosity	(50-100) with
Solvent	Solvent, xylene, white spirit or their mixture
Packaging	50 kg
Warranty period of storage	6 months from date of manufacture

Soil enamel application guide:

Application Methods		Working viscosity (VZ-246)
roller brush	(35-40) with
pneumatic spraying	(32-37) with
airless spray	(32-37) with
Dive	(20-25) with

Working conditions	Air temperature when painting not lower than +10 О С
Drying time	At a temperature (18-22) wasps and a relative humidity of not more than 65% – up to 2 hours. At a temperature (78-82) Wasps – up to 30 minutes. Low temperature and high humidity during cold drying extend the drying time.
Soil enamel consumption	On a single-layer coating – (120-180 g / m2).
Single layer coating thickness	(35 – 40) microns For a high-quality coating, applying 1-2 coats of enamel is recommended .
Cleaning tools	Solvent

Surface preparation:
Remove dust, dirt, slices of old paint, peeling, fat and other contaminants.

The surface must be dry and clean.

Preparation of primer enamel:
Mix thoroughly and dilute to working viscosity.