Scope of application:
For use in systems of corrosion protection of metal structures, mobile railway transport, steel reinforcement in reinforced concrete structures and other metal surfaces operated in atmospheric conditions.
For priming clean metal surfaces and surfaces with traces of a corrosion layer of not more than 50 microns.
The coating system, consisting of 1 layer of primer and two layers of the corresponding enamel, guarantees protection against corrosion in a temperate and cold climate for 5 years.
It is allowed to use the primer as an independent coating:
2 coats of the primer provide protection against corrosion in a temperate climate for 2 years; under the enamel coating brands PF, GF, AU, URF, HV, XC, EF.
Properties:
Technical details:
Composition | Alkyd modified varnish, anti-corrosive pigments, fillers, targeted additives |
Colour | Red brown |
Dry residue | Not less than 60% |
Relative viscosity | (60-100) with |
Solvent | Solvent, xylene, or their mixture with white spirit in a 2: 1 ratio, solvent 1A-A |
Packaging | 0.9 kg; 2.8 kg; 50 kg |
Warranty period of storage | 6 months from date of manufacture |
Application Guidelines:
Application Methods | Working viscosity (VZ-246) roller, brush: (60-80) with pneumatic spraying: (40-50) with airless spraying: (60-80) with |
Working conditions | Air temperature when painting not lower than +5 wasps |
Drying time | At a temperature (18-22) wasps and a relative humidity of not more than 65% – up to 60 minutes. Low temperature and high humidity prolong the drying time. |
Primer consumption | On single-layer coating – (100-150 g / m2) |
Single layer coating thickness | (40 – 50) microns For a high-quality coating it is recommended to apply the 1st layer of primer. |
Cleaning tools | Solvent, solvent 1A-A |
Surface preparation:
Remove dust, dirt, slices of old paint, peeling, fat and other contaminants.
The surface must be dry and clean. The degree of surface degreasing is 1, the degree of cleaning from oxides is 2.
Preparation of primers:
Mix thoroughly and dilute to working viscosity.