Rosin-modified vinyl copolymer, pigments, fillers, organic solvents, inorganic biocide (active ingredient — copper oxide).
Purpose:
To protect against the obscuration of the underwater part of river and sea vessels, piles, piers, moorings, cleaning facilities and other metal structures.
Properties:
Surface preparation:
Enamel is applied to the surface pre-painted with anti-corrosion materials.
Anticorrosive materials: paintwork materials of vinyl, vinyl-pitch or slate-vinyl type. The surface must be dry and clean.
Enamel preparation: Before mixing, thorough mixing with the help of mechanical devices is necessary until the enamel is homogeneous. If necessary, dilution of enamel in an amount of not more than 5% by weight of enamel is permitted.
For a high-quality coating it is recommended to apply 1-2 layers of varnish.
Ways of drawing | Airless Spray, Brush |
Terms of work | -15 * C to 35 * C |
Drying time | At 20 * С and humidity 65% - up to 8 hours |
Consumption | On a single-layer coating – (350-450) g / m2 |
Single layer coating thickness | (80-100) microns when applied by airless spraying |
Tool cleaning | Solvent, Xylene, R-4, R-5 |
Specifications:
one | Conditional viscosity according to the viscometer of the type VZ-246 with a nozzle diameter of 6 mm, at a temperature of (20.0 ± 0.5) ° С, not less, (s) | 40 |
2 | Mass fraction of nonvolatile substances (%) | 70-80 |
3 | Boundary thickness of nonstatic wet layer, mm | 0.4 |
four | Content of volatile organic compounds,% | > 30 |
five | Tin content | Not more than 2500 mg per 1 kg of dry film enamel |
6 | Solvent | Xylene, solvent |