Enamel “Aurora Express”

For use in temperate and cold climates.

Guarantees corrosion protection in systems with appropriate primer compositions for 5 years.

Properties:

• A wide range of color shades;
• High protective properties during long-term operation;
• High adhesion and mechanical resistance;
• The complex coating is resistant to short-term exposure to solvents, acids, alkalis and detergents at temperatures not higher than 60 ° C;
• The resistance of the film to a temperature change from minus 45 C to 60 C;
• Lack of a deposit and a superficial film at long storage.

Technical details:

Composition	Alkyd-urethane varnish, pigments, fillers, p, siktivy and other targeted additives
Dry residue	49-70%
Relative viscosity	(50-120) with
Solvent	Xylene, solvent, white spirit or their mixture
Packaging	50 kg
Warranty period of storage	6 months from date of manufacture

Guide to the use of enamel:

Application Methods		Working viscosity (VZ-246)
roller brush	(35-40) with
pneumatic spraying	(28-30) with
airless spray	(30-45) with
immersion	(20-25) with

Working conditions	Air temperature at coloring is not lower than +10? WITH
Drying time	At a temperature (18-22) Oc and relative air humidity not more than 65% – 6-12 hours, depending on the color. Low temperature and high humidity prolong the drying time
Enamel consumption	On a single-layer coating – (100-150 g / m2) depending on the color.
Single layer coating thickness	(25 – 30) microns – when applied by spraying methods (30 – 50) microns – when applied by roller or brush For a high-quality coating, it is recommended to apply 2 layers of enamel.
Cleaning tools	White spirit or solvent

Surface preparation:
Remove dust, dirt, slices of old paint, peeling, fat and other contaminants.

The surface must be dry and clean.

Metal surfaces: primed with primers “Aurora-Express”, GF-021, GF-021PV “Aurora” and others, if necessary, treat with sanding sandpaper.

Wooden surfaces: impregnate with linseed oil or porozapolnitel, process with sanding sandpaper.

Enamel preparation:
Mix thoroughly and dilute to working viscosity.