Primer “Aurora Express”

PF, GF, AU, UrF, “Aurora-Express”.

 

Properties:

 

• • High adhesion and mechanical resistance;

 

• • High anti-corrosion properties;

 

• • Resistance to transformer oil;

 

• • Lack of a deposit and a superficial film at long storage.

 

Technical details:

 

Composition	Alkyd-urethane semi-finished varnish, pigments, fillers, solvents, sativa and other targeted additives
Dry residue	58-76%
Relative viscosity	Not less than 50 s
Dilution rate	Not more than 25%
Solvent	Solvent, xylene, white spirit or mixture
Packaging	0.9 kg; 2.8 kg; 50 kg
Warranty period of storage	6 months from date of manufacture

 

Primer Application Guide:

 

Application methods		Working viscosity (VZ-246)
roller brush	(35-40) with
pneumatic spraying	(18-22) with
airless spray	(25-30) s
immersion	(16-25) with

 

Working conditions	Air temperature when painting not lower than +5 wasps
Drying time	At a temperature (18-22) wasps and a relative humidity of 65% – up to 4 hours. At a temperature (78-82) Oc – up to 30 minutes. Low temperature during the drying time.
Primer consumption	On a single-layer coating – (60-120 g / m2).
Single layer coating thickness	(15 – 20) microns – when applied by spraying methods (25 – 30) microns – when applied with a roller or brush For applying a high-quality coating, 1-2 coats of primer are recommended. Drying at a temperature of (18-22) Oc – 1 hour
Cleaning tools	Solvent

 

Surface preparation:

Remove dust, dirt, paint, peeling, fat and other contaminants.

 

The surface must be dry and clean.

 

Preparation of the primer:

Mix thoroughly and dilute to working viscosity.