The primer is intended for painting metal and wood surfaces under the coating of various enamels. Protects against corrosion. For exterior and interior.
Provides good adhesion (adhesion) between the painted surface and the top paint coating. Reduces enamel consumption. Provides reliable protection against corrosion, increases the durability of the coating.
– Grind new surfaces, remove dust.
– Remove fragile parts of old paintwork coatings from painted surfaces.
Defects and irregularities to eliminate using putty. Sand, clean from dust and dirt.
– Remove new surfaces from dust, dirt, scale, degrease.
– Remove the fragile parts of old paintwork coatings, loose and flaking rust from painted surfaces. Remove dust, dirt and degrease.
Before using the primer, mix thoroughly, if necessary, dilute to working viscosity with white spirit, solvent or their mixture in a 1: 1 ratio. To put a primer in 1 layer.
brush, roller, spray gun.
at a temperature of + 20 and a relative humidity of 65%, the drying time of one layer of enamel is 24 hours.
Primer consumption on a single-layer coating -70-120 g / m2, depending on the type of surface
The primer is stored and transported in a tightly closed container, protecting it from moisture and direct sunlight. Keep away from fire!
When carrying out painting works, as well as after their completion, it is necessary to ventilate the room thoroughly. Wear rubber gloves to protect hands.
Dispose of the closed container in the collection points for household waste.
Warranty period of storage 12 months
Gray red brown
0.9 L, 2.8 L, 50 L