High gloss, abrasion and detergent resistant alkyd enamel for wooden floors and other indoor surfaces.
FEATURES
RECOMMENDATIONS
Designed for new and previously painted wooden surfaces (including fiberboard, particleboard) indoors.
It is recommended for painting floors and other interior elements that are subject to constant mechanical loads and intensive washing.
The enamel is thoroughly mixed, if necessary, diluted with a solvent to the working viscosity. For the surface being painted for the first time: sand, remove dust and other contaminants. To reduce the consumption of enamel and to obtain the best result, it is recommended to use the VL-10 TM Priozapolnitel TM Miks color. Apply the enamel in two layers with a brush, roller or spray gun. Drying time of each layer is 24 hours.
To update previously painted surfaces: remove particles of old peeling coating, sand and clean the surface. Significantly damaged coatings must be removed completely. Enamel is applied in two layers with an interval of 24 hours.
During the work and after their completion – thoroughly air the room.
Wear rubber gloves to protect hands.
Cleaning tool: white spirit, solvent.
Keep away from fire.