Enamel GF-1426

SPECIFICATIONS:

Mass fraction of nonvolatile substances,%	58-65
VZ-246 with a nozzle diameter of 4 mm at a temperature of (20.0 ± 0.5) ° C, s, no less	50-80
Drying time to degree 3 at a temperature of (100 + 2) 0С, h, not more	3
Adhesion of film, points, not more	one
Film durability at the device, cm, not less	50
Pendulum film hardness
M-3, sm. units, not less	0.50
TML (pendulum A), rel. units, not less	0.33
The resistance of the film at a temperature of (20 + 2) 0 C, h, not less than the static effect
water	24
industrial oil	36
gasoline	eight

 

APPLICATION:

Enamel is applied by spraying, dipping or brushing.

 

If necessary, diluted with xylene, ratio by weight.

 

Spraying is 88-100 g / m2.

 

In accordance with the reference literature (“Paint coatings. Technology and equipment” ed. Moscow. Chemistry 1992) IS ALLOWED:

 

• • application for metals, aluminum and its alloys, cadmium steel;

 

• • coating operation in temperate climates; cold climate;

 

• • dry and humid tropical climate;

 

• • use of enamel on AK-070, VL-02, GF-021 primers and PF-002, MS-006 putty.

 

STORAGE:

Warranty period of storage 6 months from the date of manufacture.